The Rocky Mountain Woodturners are selling the following lathes. These lathes were used for club events and in the hands-on room at the symposium for many years. They are now ready for a new home, after new lathes were purchased by the club, and there is no longer space for these. All lathes are sold “as is”, please take note of their condition in the description.
Lathes are located at Trent Bosch’s shop (North Fort Collins) and would need to be picked up. If you are interested in purchasing one of the lathes, please contact Trent (trentbosch@yahoo.com, 970-218-6453)
Price listed below, accepting offers.
Accepted Payment: Credit Card or Check
#1 – Delta Midi Lathe (46-250)
- Price: $250 obo
- Description/Condition: In average condition, everything functions properly. Comes with what is shown, a tool rest, but no other accessories. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtube.com/shorts/0V4vBtlG-zw?feature=share
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#2 – Vicmarc VL100 SOLD
#3 – Jet Mini Lathe (1014) SOLD
#4 – Jet Mini Lathe (1014)
- Price: $250 obo
- Description/Condition: Average condition, everything functions properly. Comes with what is shown, a tool rest, but no other accessories. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtu.be/CE94ZLj3S6w
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#5 – Jet Mini Lathe (1014)
- Price: $250 obo
- Description/Condition: Average condition, everything functions properly. Pink spray paint on headstock. Comes with what is shown, a tool rest, but no other accessories. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtu.be/WpUP2WJ14DI
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#6 – Steel City (60170)
- Price: $200 obo
- Description/Condition: Ground on plug is broken (see picture). Average condition, everything functions properly. Comes with what is shown, a tool rest, but no other accessories. It is a fixed speed lathe, with 5 speeds. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtube.com/shorts/rQUR4WV2Tco?feature=share
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#7 – Jet Mini Lathe (1014)
- Price: $200 obo
- Description/Condition: Average condition, everything functions properly, but the motor does sound different than the other ones, not sure if that is an issue or not. A few spots of spray paint. Comes with what is shown, a tool rest is NOT included. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtu.be/a4BerEk0UNU
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#8 – Rikon Mini (70-100)
- Price: $250 obo
- Description/Condition: Spindle lock is broken (see picture above, covered in blue tape). Average condition, everything functions properly. Comes with what is shown, a tool rest, and live center, but no other accessories. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtube.com/shorts/vo7_wgmk_Jk?feature=share
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#9 – Jet Mini (1014)
- Price: $250 obo
- Description/Condition: Average condition, everything functions properly. Comes with what is shown, a tool rest and knockout bar, but no other accessories. It is a fixed speed lathe, with 6 pulley for speed range. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtu.be/o9Ji-1FCLag
- Can be sold with or without the wooden stand (easy to remove) – price is the same either way.
#10 – Vicmarc VL100 on Metal Stand
- Price: $300 obo
- Description/Condition: Stand has adjustable legs. Average condition, everything functions properly. Variable speed motor seems to surge quite a bit, especially when pressure is high (not unusual for DC variable speed drive like that). Comes with what is shown, a tool rest, but no other accessories. 1×8 tpi Spindle thread, #2 morse taper on both the headstock and tailstock. VERY heavy. Would make a great small lathe, or second operation lathe. 120v.
- Link to Video: https://youtube.com/shorts/ELTCNoxRo-U?feature=share
#11 – Woodfast (M408H)
- Price: $800 obo
- Description/Condition: Average condition, everything functions properly. Variable speed with 5 different pulley settings. Solid workhorse, cast iron lathe. Has a mobile base. 120v. Short bed, has 2 tool rests. 16″ swing. Would make a great lathe.
- Link to Video: https://youtube.com/shorts/StgNA5nqWS0?feature=share
#12 – Vicmarc VL200
- Price: $800 obo
- Description/Condition: Average condition, everything functions properly. Variable speed with 6 different pulley settings, it does surge a bit, especially when pressure is high (not unusual for DC variable speed drive like that). Solid workhorse, cast iron lathe. Has a 16″ swing. Currently on a piano dolly (NOT INCLUDED). 120v. Short bed. Would make a great lathe.
- Link to Video: https://youtube.com/shorts/H0Q5_ekuLbs?feature=share